Interviewing (and Teaching): Tips and Tricks for Academics to Improve their Audio and Video - WORK IN PROGRESS

Interviewing (and Teaching): Tips and Tricks for Academics to Improve their Audio and Video - WORK IN PROGRESS

Posted on: Tue, 05/12/2020 - 00:46 By: Matt

NB: I started this piece originally with the intention of talking about methods to improve your Skype interviews for academic positions, and then the COVID-19 pandemic did two things that necessitate a bit of tweaking. First, it basically froze almost all hiring in the humanities—a lot of the positions I interviewed for have been cancelled or are still very much in flux. Second, it threw a bunch of people into the deep end as far as trying to think about their online presence via video for Zoom interviews, class recordings and the like. Everyone saw the slate of videos about Zoom backgrounds, but the fact of the matter is that that sort of software-based background takes up significant processing resources that you may or may not have. Likewise, it is actually more limited than it initially seems, as it either leaves a fake-looking outline or chromakeys only on a green background, whereas are more granular setup allows you to do so with an old bedsheet or other item if you want to go that route. At any rate, in finishing up the post—which I hoped would conclude with one or both of us getting positions—it struck me that I should include some nods towards the new normal. So I'm expanding it to consider recording as a possible option as well, which is going to make the post a bit more technical than I had originally intended (and I'd already intended a more technical post than what others had provided) and which focuses on interviewing or streaming for class depending on what I'm talking about. I have hopefully organized it so I don't lose anyone, but if I do and you're not sure what I mean please feel free to contact me via the email address on my C.V. and I will be happy to help you out.

I did a few Skype interviews over the course of the past year, and as my spouse has finished up her degree I suspect there will be more than a few for either of us over the course of this upcoming market season (which, if it is like this past year, will start well ahead of the traditional September 15th window! I guess the new normal is a “soft launch,” so to speak), as well. As part of my planning one thing I’ve been thinking about a lot in the aftermath of those interviews is how to better present myself on screen. Not only are more and more campuses moving to Skype interviews as the costs of the conference interview balloons (encouraged, no doubt, by the MLA finally acknowledging the facts on the ground and suggesting web interviews over the conference a couple years back) but most campuses have invested in multimedia setups allowing committees to easily conduct the interview on their end. This is all to the good, but what about on the end of the interviewee? Most interviewees are stuck with their laptop or desktop webcam and a hopefully clean and quiet space where they can speak. If they’re lucky, they might be able to reserve a multimedia room or study space at the library and conduct their interview there. Thus, what they’re able to control in terms of how they come across to a hiring committee is not always in their hands. It makes sense to take care of those things that are. Likewise, with the new situation with COVID-19 being ready to switch to entirely online instruction has become a necessity, and for this reason it's worthwhile to think about how to do so in the best way possible.

In this post, I want to point out what an interviewee might do to make a good visual and auditory impression on a committee and hopefully make the technical aspects of a web interview a little smoother. The Chronicle has already done a article in the paper proper as well as two posts in their Chronicle Community service regarding this, but I thought all three pieces could use some expansion and in some cases, updating. Specifically, they were a little light on the various technical possibilities and what it would take to achieve the best interview possible from an audiovisual standpoint, particularly as the DIY videomaking movement has created a market for inexpensive studio lights and microphones and thus increased expectations for what an amateur video should look like. None of these tips are going to automatically result in a job offer, but what I think it will do is ensure candidates make an impression beyond another echoing voice combined with grainy, washed-out video. Likewise, if you’re interested in doing videos for your students being able to present the best audio possible along with solid video is going to make the experience more pleasant for them. Everyone has watched a washed out video with distant, echoing audio on YouTube, and your students are likely to tune those videos out and miss the important things you have to say.

We’ll start with some general advice that I think is important regardless of the type of camera and sound you might have. It repeats some of what Kelsky, Hull, and Royles have already stated, but focuses on framing that general advice through the technical lens and events on the ground that I feel their pieces are lacking. From there, we’ll move to the visual aspects—lighting options and what is possible with different types of cameras. Next, we’ll talk about sound—the microphones, cables, and audio interfaces you may want to consider to sound your absolute best, and then wrap up with postprocessing for those of you who want to try to alter your background, reduce noise, and the like programatically. In the case of the more technical aspects and hardware suggestions—at least in terms of video—I’ll move from the basic webcam and microphone that anyone might have on a desktop or laptop (or, perhaps, even on a cellphone, although that presents its own difficulties and I would not recommend it if there is any other option) to consumer grade hardware, and from there to “prosumer” grade hardware. I don’t have the money for truly professional gear and don’t really need it for the video and audio projects I am developing, so I am going to leave that aspect of things out. If your campus has studio space and you have access to it and its professional-grade equipment you likely have someone more qualified than I am who can help you with getting set up in your particular space anyway, and some of the links I provide at the end will use and recommend more professional-grade equipment if you want to dip your toes into that world. I personally think it's overkill for interviewing and recording lectures, but if you have the budget for it more power to you.

Since this is a rather large post, I'm collapsing everything past this introduction into into four broad categories: general advice, visual aspects, audio aspects, and postprocessing. Likewise, there are subsections under each of those categories that have been collapsed as well for ease of navigation and reading. Click on the header below to open the sections or subsections you're interested in. Also note that some sections are much more concerned about interviewing than recording for class; if your reason for being here is to get suggestions for making better videos for your students you may want to skim over the General Advice section and concentrate more fully on the more technical sections underneath it. There is still some useful information, especially as regards bandwidth and staging, that might be of use to instructors who are doing lectures via Zoom or over online services.

General Advice

Most candidates who are interviewing have been groomed by their advisors and department to know how to handle themselves during an interview. If they’re particularly lucky, they have been able to go through one or more mock interviews, where nervous ticks and other aspects of their performance (and while it’s true that an interview should be considered a conversation, it’s also a performance—you are presenting the best part of yourself) are critiqued by multiple faculty members and in some cases by individuals who are specifically hired by the university to aid with the job interviewing process. Nothing about those experiences should be ignored (and I’m not going to presume to be able to tell you more than your mentors in the department can in that regard when it comes to your personal case). There are things, however, that an interviewee should do slightly differently when interviewing online as opposed to interviewing in person.


Seek out the quietest place possible to conduct the interview. This is important because in a noisy hotel suite the committee is experiencing the same distractions and issues as the candidate, and that provides a degree of sympathy that may not be present if they’re in a quiet shared office or conference room while the candidate is on the other side of a glass partition from a shared kitchen space with its rattling dishes and impromptu conversations. We naturally tune out extraneous noise in our immediate environment. Microphones don’t, so any chatter may be picked up by the microphone and transmitted to the committee. This can be mitigated some through microphone selection and technique, which I’ll talk more about below.

“Pick someplace quiet” is obvious advice, but it can also prove incredibly difficult to achieve. During my second postdoc, I rented a basement apartment with inadequate sound insulation between the units—to the point where I could hear the conversations (and other activities) of the people above me. This meant that I couldn’t consistently use my living room cum office as a place to hold the interview on my end because I could not be sure the people above me wouldn’t break into an argument or even a loud conversation in the middle of my trying to explain why I’m the best fit for the particular job or explicate a tricky theoretical point. Similarly, on campus my workspace follows popular design trends, which means a cubicle that does little to abate sound or an open floorplan which does nothing.

I have come up with some solutions for this over the past couple of years, but they are largely situational. Whether it is borrowing the office of an advisor or colleague with a permanent position, reserving a study space or other quiet area on campus, or finding a quiet classroom nobody is using for that particular hour there are options available if you’re flexible, creative, and plan ahead. If you are not affiliated with a campus or if you are too low on the campus totem pole to be able to reserve such spaces you may have to see about finding someplace quiet amongst the apartments of friends, the local library, or even a living room or other shared space with appropriate warning to the other people present in the house or apartment. I’ve conducted more than one interview in my parents’ living room while home for a visit during the holidays; with proper camera placement and knowledge that I was interviewing people were able to walk behind me without being visible to the committee. In any case, finding a quiet place to talk where you’ll feel comfortable is of paramount importance. If you’re feeling cramped, worried, or otherwise “off” it will come across in your answers.

Location also brings up the issue of staging. As anyone who has watched a day of HGTV over the past fifteen years knows, staging is the strategic use of lighting, furniture and possibly selected knickknacks in order to help sell a product—in this case, yourself as a potential colleague. The advice the Chronicle and Chronicle Communitypieces offer is fairly general: make sure whatever is going to appear on camera is neat, avoid a cluttered or distracting space (Royles suggests avoiding tons of books as a backdrop, while Hull suggests that bookshelves are a good backdrop but any controversial or “loud” objects should be removed). To this advice, I would add two things: first, that any strategically-placed items should reinforce the impression that that you want to give to the committee, and second that you can avoid a committee commenting on your knick-knacks or the titles on your shelves through the use of what photographers refer to as bokeh—the deliberate out of focus background you'll find sometimes watching interviews and that Zoom and Skype try to emulate programmatically. I’ll speak more about bokeh in the camera portion below and focus primarily on the process of staging as it relates to my personal office space here as an example of a starting point that can be improved upon throughout the rest of the post. My hope is that by showing that space to you, warts and all, you might get some ideas about what your personal space says about you and how you might stage it to give the best possible impression.

My Office: Four Views

There are two types of positions I’ve typically applied for: traditional faculty positions in two specialties—Medieval English Literature and Digital Humanities—and postdoctoral positions that often fall under the umbrella of an “alt-ac” position intended primarily to support theresearch ofpermanent faculty members and graduate students as well as conducting my own research work. This means there’s three different versions of “Matthew Davis” that I have to think about when I’m considering my office space as a background for an interview. Additionally, my office is a bit schizophrenic—my desk is basically an entire dining room table, without drawers, and ordinarily a webcam would sit behind the monitor on that desk, as might be expected. This would make the “natural” background whatever is behind me as I sit at my desk. Behind my chair on the opposite wall, though, is a set of shelves where I keep cameras, my printer and stationary, audio and lighting equipment, tubs of cables, tools, and small parts bins. As such, those shelves might look more in place in a garage or workshop space than in an academic office—in fact, a friend has referred to it as the “right-wing radio host” view of my office for its similarity to the sorts of backdrops favored by those low-budget shows on YouTube and Twitch. My actual bookshelves are on either side of the room in order to keep the sun from fading the spines, and tucked away by the door is my all-important coffee cart.

A view of a set of shelves with a bunch of bins on them.
The view from the webcam where it usually sits on top of my computer–what one friend refers to as the "right-wing radio host view" and what I tend to refer to as the "workshop view," as it shows most of my small electronics and parts bins. The "interview space" wall is to the right and the "coffee station" is to the left.
A webcam shot of an empty chair in an office with a bookshelf background.
My "interview space" as it usually looks without me in the chair. My computer monitors are to the right in the room, and my bookshelves, pens and ink, and Arduino projects are resting on top of the bookshelf. Also on top of that bookcase is a mechanical keyboard that I use with a Raspberry Pi file server.
A view of a desktop containing two monitors and a sound mixer. Shelves are in the background.
The view of my desktop, with shelving above it and my mixer to the left. Just out of frame is the microphone that can be seen in the previous image, and the top shelf contains more tubs of computer and audio cables. The "interview space" wall is to the left here and the "coffee station" is to the right, and the webcam taking these pictures usually rests on top of the monitor facing towards the camera.
A picture of a closet with a coffee station to its left and a bookshelf to its right. A chair is in front of it.
The view of the "coffee station" wall, with my coffeemaker to the left of the closet door and shelving to the right. The shelves for my small parts bins are also to the right, and you can see a small piece of grip equipment leaning against the wire shelving at the right part of the frame. This is also the view that tends to hold lights and my camera tripod when I am set up for interviews and recording.

As part of my initial exploration of the space, then, I have photos of each wall of the room as a background, following Royles’ advice and keeping the background parallel to the screen. Note that here I’m using a webcam as my camera and I’ve done nothing to clean up the space. You can see that the four walls present four distinctly different impressions of me, and none of those impressions are perfect. The four pictures suggest that it would likely be best to interview with either the low bookshelf or the “radio host" view in the background. Considering the amount of items in the "radio host" view that are not directly germane to the types of positions I'm applying for, however, it probably makes a lot more sense to use the low bookshelf as a background, which is part of the reason I have taken to calling that background the "interview view." However, depending on the position of my chair the items on top of the bookshelf may provide a distraction. Ordinarily they are blocked, as evidenced in the videos in that Visual and Audio sections, but the platform the keyboard and lights rest on and the board my DIY benchtop power supply rest on are both a lighter color than the bookshelf since they are really meant to be in a workshop rather than my office. For this reason they're almost guaranteed to draw the eye if they both come into frame and are in focus. Likewise, the wireless router mounted to the wall on the right of the bookcase and the Arduino boards next to the power supply both blink, which may be distracting to a committee or a class. Depending on the particular position I'm interviewing for, it might make better sense to clear the fountain pen inks and platform off the top of the shelf and place more books there, or to select the keyboard and inks but move the power supply. If the lights can be seen during a test video it may also make sense to move the Arduino boards and router entirely so they do not serve as a blinking distraction.In every case, the decision is largely dependent on how clear the background is in comparison to the foreground and whether I include a colored “wall wash” light as a point of interest, as I do when I’m using this background for instructional videos. For this reason the specific decisions made for the types of positions I’m applying to will mostly be discussed later in the camera section, as camera selection will make a difference in what actually needs to happen in terms of staging that background area.

Time and preparation

Again, I’m assuming your mentors have given you suggestions about how to prepare for the interview in your area in general. My thoughts on preparation have more to do with setting up the space for the interview and having it look the best it can.

Record a short video of yourself in the space, dressed in what you will wear to the interview and with the equipment you intend to use. You might move around a bit and gesticulate, especially if you tend to do so when making points. It doesn’t matter what you’re saying in your video, obviously—what you’re doing here is looking at how the space looks and sounds on camera as is, so you can think about how you’re going to light it and how to position yourself on camera. Hopefully you’ll only really have to do this once if you have a dedicated interview space; if not, try to find time in the period before your interview to see how you look on camera. This can also help to determine whether you might have any issues—for example, one of my cameras uses facial tracking to help keep in focus. This means that I can have issues with the image going slightly fuzzy if I gesture too much depending on the type of lens I use, as it's trying to track my face while I speak in an animated fashion.

In addition to making yourself aware of the space before your interview also give yourself an ample window on the day of to prepare. It takes time to set up a space to look its best for the camera (especially if it’s a space you don’t ordinarily have control over), and you need time to mentally prepare for the interview as well. Ideally, I like to try to give myself at least an hour before the interview to set the space up and go over my notes one last time. Any equipment you’re bringing with you should have already been tested prior to being packed, if you will be using a shared space, or set up perhaps the evening prior if not. If your camera takes batteries, make sure the batteries are charged. Doublecheck any cables, stands, or tripods you might need to take with you and make sure you have long enough extension cords to reach any outlets you might need to reach.

If you are going to be traveling, make sure you have a backup for any equipment you bring as well and budget time for the unexpected. Last year I interviewed for a fellowship in a reserved campus space and it ended up taking longer than expected to get there and set up. On top of that, I had difficulty setting up my camera and ended up having to use my laptop. I only just finished setting up the space when the call from their end came through the line, which meant I wasn’t in an ideal mental space to begin the interview.


A clean image with good audio is going to take up more bandwidth than a grainy, compressed picture, but will be much more pleasant for a committee to look at and interact with. Thus, if you follow the suggestions regarding producing a quality video below you are going to need decent bandwidth. Even the fastest commercially available wireless ethernet commonly available, the Wifi 6 (or 802.11ax) standard, tops out at 1.1Gbps on the 2.4Ghz band that most campus and residential wifi access points use, but is much more likely to actually deliver a lower speed. At 5Ghz the standard tops out at 4.8Gbps, but again is more likely to actually deliver at a lower speed. The more common Wifi 5 (or 802.11ac) standard tops out 450Mbps and 1.3 Gbps, respectively. Because of this disparity between the speed at the two frequencies you should make sure your computer is set to use the 5GHz band if possible. Even better, avoid wireless entirely and use a wired connection. Wifi 5 is still the most common residential and campus standard, and those numbers tend to be "up to" ratings rather than consistent results—which leaves a lot of room for much slower connections. Especially in a situation where you have tons of people connecting to the same access point, such as in a library, or something where there are a lot of things attempting to use that 2.4Ghz radio band. The “real” speed of your connection will generally be significantly lower on both channels. A wired connection, on the other hand, avoids any sort of radio interference. Its speed will be capped at whatever the router and cables you use can take, but the bandwidth on a campus wired connection will generally be rated in multiple gigabits per second—more than your hardware can take advantage of. Likewise, most cable or fiber ethernet providers will offer a gigabit ethernet connection, which is generally the top end of most consumer ethernet routers (this is changing—I’m seeing 20 gigabit home setups but they mostly seem to be limited to enthusiasts with access to fiber connections to the home at the moment). Regardless of the speed of the wired connection, you will almost always have a faster connection over wire than over wifi, provided you are using modern equipment and category 5e, category 6 or 6A, or (if you’re reading this in the next few years from now) category 7A or 8 cables.

Visual Aspects

Obviously, if you are going to be recording yourself or streaming video to a committee you'll need to think about the visual setup you're working with. Kelsky, Hull, and Royles all touch on differing aspects of how to present yourself visually online, as mentioned above. What they don't really do is get into the various ways you might improve your visuals for the audience beyond some simple lighting and staging tips. To be honest, those tips may be enough. But if you're like me watching people in meetings has displayed a lot of ways in which lighting, camera issues, or staging problems can cause someone's message to fall on deaf ears.

In this section, then, we'll first expand on the staging discussion above to talk about ways that the background can help to improve the visual composition of a scene. From there, we'll talk about the various camera options available to you and finish up the section with ways you can use lighting and composition in the frame to make sure you look your absolute best.

While I touched on my particular office and the various background options available to me earlier briefly I didn't say much about actually attempting to dress up the space. For this reason, I thought it might be useful to look at some examples of non-academics doing informational videos online. Because YouTube has become a legitimate medium for people to make a living doing informational videos, many of them have taken time and thought on the staging of their background—especially when they have a dedicated recording space (which may become necessary if you are going to be teaching remotely for the next year). Furthermore, since most of them tend to do a least part of their video content as a "talking head," front-facing video they can serve as inspiration for how to stage your space. I wouldn't necessarily go to the level some of them have, but you might get some useful ideas from the various individuals below if you don't want to use bokeh or the in-program blur feature to de-emphasize your background. I'll also include a couple of examples taken from video interviews in order to discuss the pros and cons of trying to record in ad-hoc setup for those of you who may need to carve out space in an office, living room, or random corner in order to record your videos or conduct your interview.

A frame from the DSLR Video Shooter YouTube series
Like a lot of photography YouTuber personalities Caleb, the host of the DSLR Video Shooter channel, uses paper backgrounds in order to create a neutral backdrop for his videos. In this case he's chosen a black paper background which, when lit, appears grey in comparison to the non-lit areas in the corners. When combined with a polarizing filter this can create a pleasant effect and does not come across as simply being a neutral wall. This can also be a useful backdrop for chromakeying (or green screening), depending on the color of background chosen. The benefit of this setup, obviously, is that Caleb is automatically the focal point since he's really the only thing on camera. Lighting is absolutely something you want to consider, however, as you want to make sure you're differentiated from the background you're working with and that you don't appear washed out.
A frame from the YCImaging YouTube series
The YCImaging channel concentrates and tips and reviews for aspiring videographers. The host, Chrystopher, mentions in a video (linked to below in the staging section of the bibligraphy) that he deliberately chose the color scheme of this backdrop in order to highlight his skintone and make sure that he remains the focal point of any talking head video he's doing. It's also interesting to note that this space, when shown in that video, is much brighter than it appears here. He's taken the time to carefully stage things for what appears to be an informal video—closing the curtains, but also making sure that the light stays off the back wall in order to keep from backlighting him by having light bounce off the white wall in the background. This might be a good example if you want to appear informal in an interview or while teaching, but it does lack any elements that directly speak to his expertise. In this case that may be a positive, however, as the pictures he does have give a sense of his personality and the general layout invites conversation.
A frame from the Hallease YouTube series
Hallease's background is interesting because it incorporates a window along with dark backgrounds. She mentions in the video this screenshot is taken from that the window is serving as the kicker in her lighting setup, but it also helps to illustrate the items on her bookcase without drawing too much attention to it. The other light, to the left, serves as a kind of counterbalance, but my one worry is that with the darker background the window might be a distraction. Note though that she's chosen lighter colors to wear to help differentiate herself from the background. That helps a viewer to help keep the focus on her rather than causing her to appear to be a head floating in a void.
A frame from the DIY Perks YouTube series
Similarly to Hallease, the DIY Perks YouTube channel shows the benefits of a minimalist staging setup. The carefully chosen accent items and greenery on the desk, combined with the neutral background, provides a viewer with a sense of the host, Matt's, personality without being overwhealming. This is probably the closest of the examples I've chosen to a traditional ideal interviewing setup online without simply being an entirely neutral backdrop. The items chosen are interesting because they're examples of projects Matt has done in the past, but they don't immediately advertise that to the viewer. It might be useful if you are interviewing to have something that invites comment, like these items, but that doesn't demand it.
A frame from the Technology Connections YouTube series
Alec, the host of Technology Connections, a YouTube channel about how various pieces of technology work (and worked in the past, in some cases) has put a lot of time and thought into the background of his videos. He uses what looks like standard black Ikea Kallax shielving units to create a series of compartments, in which he places various examples of the types of technology he's talked about in the past. Colored LED lights reinforce the indivdiualized nature of the compartments. I think this works because it's got a regular pattern, rather than seeming like a jumbled mess of items. That regular pattern helps to create a frame for him, which in turn helps to reinforce his status as the focal point. While I'm pretty sure that the standard advice would be to not have as much in the background, the curated nature of the items he's chosen reinforce his area of claimed expertise. Also, realistically the space you interview in may have to have clutter in it for practical reasons due to space and storage requirements; if you can make that clutter look intentional you can help it to fade into the background.
A frame from Adam Savage's Tested YouTube Series.
Adam Savage films his Tested series in his workshop, and so the background is both always changing and always chaotic. This works with Savage's brand as an entertainer, but unlike Technology Connections there are generally enough pieces in the background that a casual viewer can get distracted easily. I personally like the aesthetic, as my personal sense of interior design leans toward the Edwardian curiosity shop rather than the empty spaces of Swedish Modern, but it's too easy to become distracted by the lack of patterns in the background and start to look at individual curiosities rather than listen to the speaker. And unless your personality demands the attention of an audience, as Savage's does, that can be a mistake when interviewing or conducting a class.
A frame from the Gamers Nexus YouTube channel.
The Gamer's Nexus YouTube channel shows an angled approach to the background of "talking head" video, with tools along the right side of the screen and a more eclectic mix of parts and general "geek" decorative items on the left. It avoids the cluttered appearance of Savage's shop through the use of those items and also by positioning the various elements so that they face the camera. Since the channel is focused on technical reviews, custom computer builds, and computer industry news this approach helps to reinforce their expertise. There are some elements, however, like the boxes at the top on the left, that are distracting because it's not immediately apparent what they are. Odd items in the background tnat invite continued speculation are going to distract a viewer, so try to make sure your background items are easily identifable and reinforce the impression you want to give.
A frame from the Craft Computing YouTube channel.
The Craft Computing YouTube channel is interesting because it's host, Jeff, combines his love of craft beer and cocktails with solid advice on computing and other technical subjects. It's also interesting as he varies his lighting and shots depending on the type of content he is producing for a particular day, which can help to change the tone of each video. Here we see a modified version of the rule of three (more on this below), with him slightly to the side and both selected pieces of technical hardware and his bar setup in the background. While obviously I don't suggest having a full bar on display in the background while you're teaching or interviewing, the way he has carefully selected specific items to place on the shelves in the background on the left can be a useful way to approach having a neutral background while not appearing too sterile. The items can also easily be swapped out to give different impressions depending on the type of material you're covering.
A frame from the Lilsimsie YouTube channel.
The Lilsimsie YouTube channel focuses on the Sims video game franchise. The host, Kayla, is using the same sort of compartmentalized background as Alec from Technology Connections, but approaches the camera from a three-quarters perspective rather than head-on. This is good technique for interviewing a subject but is likely not something you'll be able to do in an job interview situation due to reasons I discuss in the composing section below. Her background is also slightly blurred, which lets you recognize the various items in place without being able to focus on them too closely. Such an approach allows the viewer to get a sense of her personality but keeps her as the focal point. While I wouldn't choose the exact items she's using in her video the general layout is an approach you might consider.
An image from a remote television appearance by Betsy DeVos.
This much-derided viral image of Secretary of Education Betsy DeVos shows the danger of a background that appears too sterile. Her composition is slightly off (although she does follow the rule for headroom outlined below), but because her shelves are focused more on interior design than books it creates a discontinuity between the purported subject of her expertise and how she presents herself on video. That the individual items are fairly anodyne—appearing chosen more for their looks on the shelf rather than any apparent personal connection—also reinforces negative perceptions of DeVos as largely without warmth herself. She would have been better off appearing in front of a completely neutral background or in selecting a few books to place on her strangely empty bookselves. Keep this in mind when you're interviewing and teaching; it's all right to select a few things that show aspects of your personality so long as it's done in a subdued manner. Those selections can help to foster connections that might not otherwise organically grow (for example, how many of you had a pet wander into frame while teaching and had the conversation derailed for a few minutes? That's ok. You're allowed to be human). If you can't, you're probably better off speaking or interviewing in front of a blank wall of a neutral color or purposely blurring the background.
An image from a remote television appearance by Margaret Spellings.
In comparison to DeVos' image, this screenshot from a remote interview with former Secretary of Education and former University of North Carolina President Margaret Spellings is a poorer shot in terms of camera positioning. That camera positioning, however, allows the beams of the ceiling to create some interesting perspective lines that help to draw the viewer's focus to her. Although obscured by the chyron to some degree, her background also shows some personal touches such as what appears to be a plant by the window, the star motief on her mantle, and what appears to be some crockery underneath the cabinet on the right. Those touches help to make her background not seem as sterile as DeVos'.

Something else to notice in some of the images (in particular, the YCImaging, Technology Connections, and Margaret Spellings examples) is that the background also serves as a frame that draws the eye towards the speaker. This is a useful composition technique that I'll talk about more below, but I just wanted to draw your attention to them while the examples are still fresh in your mind.

Lighting and Composition

Lighting and composition are a big part of what makes a camera shot look good. Composition is kind of locked in (but define it), so worry about lighting.

  1. accent and focal lighting.
Lighting Options
Desk Lights
Studio Lights
Natural Light
Lighting Color Theory
  1. Various levels of lighting—picture examples. Desk lamps to dedicated video lights to softboxes. Talk about color temperature. 5500k is what you want to shoot for if you can. If you're shooting a video, though, you can fix the lighting in post if you know the color temperature of your lights. Show examples from commercial bulbs.
Bounce Cards and Reflectors
Configuring Your Lights
Three Point Lighting
  1. Colored hair lights - might be a nice thing, might be a distraction, but worth mentioning as I see it in the videographer setups often.

It's a known truism that there's a difference between dark and light skin when it comes to photography and video. It's a problem that feeds into everything from misidentification by AI systems to sensors in bathrooms not turning on faucets for black patrons. While there are still systemic issues in how technology deals with different skin tones the technical hurdle is a direct result of most photographic systems being designed for white skin. Essentially a racist society encoded that racism into the design of the tools it created, and now those tools are unintentionally reinforcing that racism because it's simply less expensive to produce equipment that works flawlessly on white skin than it is to produce equipment that operates on darker skintones.

If you have darker skin and you're looking to light yourself for an interview or class recording this creates a set of hurdles that I really have no personal experience with. And since I use myself as the baseline, as most people do, when thinking through these sorts of things my advice is going to skew towards what makes me look decent. This may or may not work for you, and I recognize that. I don't want to give you a bunch of suggestions that assume I understand the problem fully, though, because I don't. As a white man, for me it's an abstract problem to wrestle with, not a lived, day to day thing. And you don't need my abstracted, tone-deaf advice. You need tips and tricks that will work for you.

What I've done, and will continue to do, is collect videos and articles from people of color or professional lighting technicians explaining what they think about when considering the space for lighting their own skin or that of darker-skinned models and actors and place them in a section under the lighting section of the bibliography at the bottom of this post for ease of reference. As a starting place, I would suggest looking at the Mic piece on the lighting of the HBO comedy Insecure, as that show is receiving a lot of praise from the other sources I've found. It's included in the bibliography along with some videos about the program and other pieces about how to light darker skin. The rest of the lighting section, and the links in the bibliography about lighting, are intended to be technical aids for anyone to help deal with their particular situation. In both you should be able to find some good suggestions for cheap ways to do what at least part of what Berkofsky is able to accomplish with multi-thousand dollar rigs. Aundre Larrow also has some good advice you may be able to use for staging and composition as well as lighting, although his lighting advice tends towards photography rather than video. The video linked here and an article he wrote for Adobe are included in the bibliography, as well. Finally if you have any suggestions you'd like to pass along or if you've done your own tutorial please contact me and let me know. I'd be happy to either include the advice or link to your tutorial, with all due credit given.

I should also note that it's possible to correct how your skintone looks in postprocessing, but there's still problems with darker skintones when you attempt to do so due to how it can make the rest of the scene look in comparison. The less postprocessing work you have to do the more likely it is that all of the colors, both of your skin and the environment, will look good in something you've recorded.

The Rule of Three

The rule of three also applies to composing the frame for your image, but in a slightly different way than it does in terms of decorating and staging.

If you look at most interviews, the subject is slightly to one side of the screen or the other even when they're talking directly at the camera. This is because most times photographers and videographers want to avoid appearing to split the screen in half. There are a lot of reasons given for it -- balancing light and dark in an image, Proper positioning of the head relative to the rest of the frame in order to focus on the eyes, and the use of the Golden Mean to divide up an image in a way that's visually pleasing.

In order to achieve this (which I do not do in several of the videos connected to this post for reasons I'll get into below) you want to think of the camera frame as divided into roughly nine equal sized boxes. If your camera has the ability to do so, you can use a grid overlay to help visualize this. Once you have your grid marked out, your ideal position is with your body along one of the vertical lines and your eyes at the juncture between the topmost horizontal line and that vertical line. This will give you the proper headroom and put you at an angle. It also has the benefit, if you're recording, of creating a space to the side which you can use for textual overlays illustrating concepts. Furthermore, you can use this method (or really any method derived from the Golden Mean) to subdivide your image frame with a picture-in-picure of the screen of your computer, a video you may be commenting on, or anything else you might want the audience to look at simultaneously.

When you're interviewing for a position, however, the fictive illusion is that you're participating in an in-person conversation with the committee, and you may want to engage them face-on because of this. It certainly is what they're expecting even if the slightly off-center, three-quarter view of your body might be a more pleasing composition aesthetically. So for an interview, what I would do is break the rule of three in terms of vertical composition, but make sure your eyes still rest on that topmost horizontal line. That way you're still providing the proper headspace while acknowledging the conceits of the online interview as a format. To make this work more naturally, however, you may as part of your staging want to create a natural frame from some shelving or other elements of the room.



Obviously, the first thing you need if you're going to capture yourself on video for streaming or to record lectures is a camera, which can be a problem. Decent cameras are expensive, especially if you're dealing with a graduate stipend or adjunct instructor's salary. The "default" webcam used by most people, the Logitech C920, can run close to if not over $100. A decent point and shoot camera like the Sony RX100 series can be close to $500, and a true DSLR or mirrorless camera can run anywhere from $600 to multiple thousands of dollars for just the body of the camera without any additional lenses. And while in the audio section I can (and in most cases do) showcase a sampling of microphones of different types and at different price points I simply don't have the money to do that here, largely because I've been either a postdoctoral researcher or adjunct instructor so far. Rather than being a hardware review or comparison, then, this section is going rely mostly on treating the actual camera hardware as categories, using what I do have as examples to talk about concepts.

Another reason not to worry too heavily about the camera choice is that I firmly believe that you should prioritize your bandwidth, then your audio, then your image quality. The most pristine image in the world isn't going to matter if it's not getting to your students or the committee, and a good picture combined with bad audio is going to be more frustrating than good audio combined with a slightly grainy image. Don't break the bank on your camera choice. If you feel like you have to spend, then I would spend on your computer first if you're going to be doing things live. If you're recording, then I would spend first on your audio. The whole reason I'm able to work with a DSLR when I shoot videos for my classes or interview is because I purchased one for unrelated research purposes. If I were buying things solely for interviewing or classroom instruction I'd consider the C920 perfectly fine. If you have the money, however, and want to achieve results similar to YouTube and TikTok influencers (which may be worthwhile as a means to meet your students halfway), then a dedicated DSLR or mirrorless camera might be worthwhile. It's important, though, to keep in mind that while each level provides greater options in terms of getting the exact image you’re looking for those options mean more overhead in terms of preparation and computing power. Test any setup to give yourself time to troubleshoot any issues as they come up.

The last piece of general advice I want to note before moving into the various classes of camera is that many of the ways to get the best picture technically, such as dialing in your framerate, shutter speed, and aperture, can only easily be done on a dedicated camera. This itself may cause you to want to improve your hardware depending on your environment. That said, there are sometimes pieces of software that will mimic the effects for your integrated or dedicated webcam, and I'll note those when available.

In talking about these cameras I'll mention things like resolution and framerate in the first bit, on the standard laptop webcam. I'll then use that baseline as something to refer to when discussing the other options.

Standard Laptop Webcam

The webcam that your laptop comes with is actually a pretty low-resolution device. If you look at the specifications of my laptop (a 2015 Macbook Pro), for example, it states that the camera is a "720p HD" webcam. Looking at it through a tool like the webcam test at shows that the maximum resolution of the camera is 720x1280, which equates to a little less than one megapixel. This is not a bad resolution to send over the web as it's not likely to break even a modest internet connection, but it also means that the video is going to be grainy, especially when blown up to full screen size on a large monitor.


The framerate of a camera is the rate at which it captures video over the course of a second of shooting. Somewhere between twelve and sixteen frames are necessary to fool your eye that what you're seeing is a continuous image rather than a series of pictures replacing each other, but the more images that can be captured, the more lifelike the video will seem. This is similar to how video is displayed on a computer, as well, and you may be used to thinking of this the other way around if you tend to play first person shooters or other video games. Most laptop cameras capture video at 30fps, which is good enough to capture video in all but the most constrained of bandwidth situations. If your laptop camera can shoot in 60fps that allows you to have a more lifelike range of motion and, when combined with the right lighting can elevate the visuals accordingly.


Besides the limitations of the built-in webcam in terms of resolution, another important consideration is positioning. Since a standard webcam on a laptop sits a the top of the screen it becomes very hard to compose the image in a way that is both flattering and allows you to continue to use the laptop as a computer. We've all seen pictures of people precariously balancing their laptop on their lap with the screen pointed out towards their face, affording the viewer a stellar look at their nostrils but not doing much to make them appear flattering. To counteract this you might consider placing the monitor so that the screen is equal with your eye height and using an external keyboard and mouse (whether wired or wireless) to controll the screen should you need to. When I am talking with an audience via my laptop's webcam I'll often have it balanced on a stack of books in a spare conference room, with a cheap bluetooth mouse and keyboard balanced in my lap should I need to do anything with the screen.

Despite this limitation of built-in webcams, it can also be a benefit as the camera's position relatively close to you can make it look more like you're looking directly at the committee or audience. While this is important with any camera (see the composition section on window positioning below for more) the fact that the camera is integrated tends to encourage you to look like you're looking directly at the committee or class rather than slightly up or down as might otherwise happen. This can be further encouraged by using a post-it note or tag on top of the monitor to draw the eye—which is a tip my brother suggested to me when I was polling people for ideas for interviewing. He likes to draw a face on the post-it as further reinforcement, so that may be something to consider as well.

Dedicated Webcam

The Logitech C920 can function as a roughly 2 megapixel camera, giving a maximum resolution of 1920x1080 pixels. This is in keeping with the camera's specs, which states that it's a "Full HD," 1080p camera. It shoots at thirty frames per second, which is similar to the laptop's dedicated webcam, but at a higher resolution. If you use the software provided with the camera you can crop this 1920x1080 image to a 640x480 one, which gives the visual impression of being zoomed in and cuts off the left and right sides of the screen. Other cameras in the series, such as the C930e, tend to have similar stats in terms of resolution, but with features like a superior low-light visibility and the ability to encode the video in the camera versus on your PC.

With the rise of streaming there's a slew of "content creator" webcams that are starting to show up with associated software packages that apes some of the functionality of a mirrorless or DSLR camera. In my experience playing with one such tool, Logitech's Capture application, the benefit is largely offset by some fairly significant processing overhead. This overhead resulted in images becoming laggy or otherwise not syncing to my actual movements in front of the camera. I suspect you have to have a specific computer and camera combination to take advantage of the software to its fullest, so you'd likely be better off concentrating on composition and lighting rather than trying to eke a bit more out of your webcam hardware.

The Cell Phone as a Webcam

NewTek's NDI protocol allows you to use your cell phone as a webcam, so it is in theory possible to use your phone as a camera if the quality of the video it takes is better than that of your webcam (or if you don't have a webcam at all). I wouldn't recommend this as an option, though, because NewTek's app seems to be limited solely to iOS phones at the moment and requires you to jerryrig some kind of stand for the phone that may or may not be easy to do. Clip-on mounts exist if you do a search for "cell phone monitor mount," but they seem to be a very niche product.

If you do decide to use your phone as a webcam, make sure it is charged and that there is an NDI output available to that tool. In most setups I've seen as of the time of this post the software chain to make this work seems to be NDI to OBS, Wirecast, or some other streaming tool, which then serves as a virtual camera that Zoom may or may not recognize. It is doable, but you're adding levels of complexity and processing overhead with every tool you add into the mix. And that complexity may result in lag which your interviewers or students will notice. If you feel like you have no other options there will be links to how to set up NDI in the Bibliography, but I have to stress you need to test the setup and test it again. You're doing things here that at least one aspect of the software chain was not intended for and it may break on you.

"Real" Cameras as Webcams

Tips to get a good picture - acknowledge that the videos you're showing here do not always use them. Suggest going to simplest first—auto, then adjust if it looks bad.

  • Shutter speed - 1/50
  • Use ISO to adjust brightness. Lower ISO darkens image. High ISO results in digital noise.
  • The DSLR or Mirrorless Camera as a Webcam
    Lens Selection

    One of the nice things about a mirrorless or DSLR camera is the ability to use different lenses.

  • Bokeh
  • Live Processing

    If you want the full range of control over your image you might want to consider using a tool like Open Broadcast Studio as a webcam. If you do this, you can use various color grading tools, multiple cameras, picture-in-picture options, and full chromakeying (rather than being limited to a green screen) live while you're streaming. I'll include a number of links to OBS tutorials in the bibliography for those of you that want to add this option to your streaming and recording, but know that adding OBS into your workflow can cause some significant processing overhead, especially because you need to have both OBS and the OBS-Virtualcam plugin for your particular platform running at the same time. So in essence when OBS is added there are three pieces of software between your device and the tool you're using to stream. In addition my laptop, at least, tends to slow down the image and make it noticably out of sync with my movements. If your machine is like mine and lacks the ability to add more memory (or if you've maxed the memory of the machine already) delays due to that processing overhead cannot be overcome easily. When recording, however, processing can occur after the fact (which I'll touch on below) and that allows the processing overhead to be more distributed between both hardware and software.

    There are also other options out there, but they are paid products so may be beyond your budget and may not may not offer more robust webcam integration.

    My Setup

    So keeping all of this in mind, I want to take a moment to talk about the setup I use interviews and online instruction. This is not meant to give you a definitive example of what you must do to achieve quality videos, but rather as a jumping off point for your own thinking about the setup that works best for you. Everybody is in a different situation, and because of that there can be no one size fits all solution. That's one of the problems I've had with the previous examples; because their advice was intended to fit the widest possible set of circumstances they didn't really get into the particular technical aspects and arm readers with the tools needed to best apply that general advice to their specific situation. So in this section I want to go through my plans for the interview space I have to give you an idea of how you can apply these general ideas to your specifics.

    So let's talk about the space I have and what I might do with it. As a reminder, this is the space that I'm planning on using for interviewing at the moment:

    A webcam shot of an empty chair in an office with a bookshelf background.
    My "interview space" without any sort of attempt at lighting. The arm my kicker/hair light attaches to can be seen in the upper left of the picture. Prior to this, I used a standard clamp lamp that I attached to the mental post of the shelving.

    I'm using a Logitech c920, with its wider depth of field, to take this picture so it's showing a fairly wide-angle view of the room. However, as mentioned above I purchased a DSLR for research purposes a few years ago. My primary goal in doing so was to find a camera that worked with my existing lenses but still had a high resolution, as I had to both take pictures of objects that were hundreds of feet up on cathedral ceilings and walls and of small blemishes in manuscripts and on wall paintings and carvings. Video, at the time, was not even a concern. The camera I went with does have a very high resolution, but is limited to 1080p video at 30fps. Still, the ability to use different types of lenses tends to make it look a lot better than the similarly-spec'd for video c920 or c930e, which start with a wide field of view and then narrow down via software.

    The actual viewable space with the camera and lens I've selected to use for interviews and teaching is not nearly as wide as what appears in the picture here, however. If you look at this clip from the microphone comparison video I posted in the audio section below you can see that the space really only has the leftmost portion of the tall bookcase, the smaller bookcase with things resting on top, and the mixer on the right in it. Since I can't really move the taller bookcase the real usable space I have is the top of that smaller bookcase and the desk on the right of the picture. The mixer helps to frame me slightly, and really shouldn't be moved because I run my microphone into it and then from it into my audio interface. The bokeh of the 50mm lens I use for my videos and streaming helps to de-emphasize the background, but the general shapes of things are still discernable.
    A shot of a man sitting in a chair talking on a microphone. Shelves are in the background.
    My "interview space" as seen with the DSLR and 50mm lens. The lights I'm using here are much brighter softbox lights and the kicker/hair light is the clamp lamp I mentioned above. No attempt has been made to dress up the space behind me, and it shows.

    Effectively, then, the space I have available to me is the top of the bookshelf behind me, which is partially obscured by the back of my chair. This space needs to reflect some of my interests, draw the viewer back to me rather than to the bookshelves, mixer, or any potentially blinking lights of things like my router, and not be distracting in its own right. Furthermore, as mentioned above I have to dress the space for multiple types of positions.

    The first thing I did, then was to create a raised platform so that any items I put on it would clear the back of the chair and be visible in the shot if I desired. During the last semester I had built a "recording" light out of under cabinet RGBWW lights that I had mounted over the door of the office; I repurposed this to create a blue "wall wash" light to rest on top of this platform in order to help draw attention from the viewer back towards me as the central figure and away from any extraneous lights on the right side of the screen. In front of this light I usually have an extra keyboard I use with my fileserver, here propped up in order to help avoid dust collection, along with a couple of knickknacks given to me as gifts. This way the space follows the rule of three. To the left of this platform I placed a reading lamp with a low amber light to serve as a kind of accent piece, and put my collection of fountain pen inks next to that light. As they are three separate heights I feel they're following good design rules, but if I had other items that worked I might put those there as well. The back of my chair serves to block the bottom of the platform, so I have my file server and the test tubes I use for mixing inks underneath that.

    A picture of a chair with a background partially obscured by it.
    This is a picture of my background and chair when I'm not sitting there. As you can see the wash and accent lights are visible, but the platform the keyboard rests on is obscured from the viewer. I could get a more open chair if I wanted to accentuate the items behind me, but the way they're set up now is enough to make an audience aware that they're present but not make them the focal point. If I were going to make this a dedicated recording/interview space I would probably move the picture lower on the wall to rest behind me and create something to complete the frame created by the bookcase on the left and the top of the bookcase here.
    A picture of a chair turned to the side so you can see various items on top of a bookcase, such as a keyboard, a lamp, some ink bottles, and a couple of hard drives.
    A view of the top of the bookshelf with the platform I created to raise up the level so things are visible behind the chair. You can see the knicknacks and keyboard here as well as my file server and test tubes, which are ordinarily obscured. You can also see the drives I have attached to my very low-rent fileserver box, unfortunately. In an interview I would make more of an effort to hide those items, perhaps by placing them on the floor.
    A picture of a chair turned to the side so you can see the lamp and ink bottles on top of the bookcase.
    A view of the top of the bookshelf with the lamp and ink bottles mentioned earlier visible. During a recording for class or interview this is what would most likely be visible, especially if I went with a modified three-quarter stance and utilized the rule of three to put myself closer to the right side of the screen.
    A picture of a camera tripod framed by two studio lights
    This is what I'm looking at when I'm recording my video. My camera isn't on the tripod, obviously, but my key light sits to the left of where I'm sitting and the fill light sits to the right. I use a TV Tray and stacks of books or tubs to get my laptop up to the proper height for me to look at an interviewing committee and the camera at approximately the same time. If I were being really fancy, I would get a teleprompter so that I could look directly at the camera while teaching and interviewing, but most teleprompter units range in the multiple hundred to thousands of dollars and that's too much for me to invest at this point.
    A picture of a studio light
    My key light sits on a Matthews 40" "Hollywood Head" Arm, which is clamped to the table with a Manfrotto Superclamp. Before I had this it would be set up on a tripod that sat just behind the desk next to the office door. The "barn doors" in my particular lights are reflective, which allows more of the light to reach me. And since they're relatively close to where I'm sitting and have individual switches for sets of rows of lights I tend to have this light turned down to the lowest possible brightness and two of the rows turned off.
    A picture of a studio light
    My fill light is similar to the key light, except that I will have three of the switches turned off. Here, it's attached to an Impact double-articulated arm attached to a Manfrotto Superclamp. This allows me to position it in the very tight space of the office. Before I had the arm, I would place it on a tripod behind and to the left of the shelving.
    A picture of a studio light with a red gel over it
    My kicker light is also attached to an Impact double-articulated arm attached to a Manfrotto Superclamp, and it rests out and slightly behind my head. It's anchored to the upright of the shelving that you can see behind me in the "radio host" view above. This light has color temperature and brightness control, but as I mention below I wanted to be able to have a slightly red cast to accentuate the reflection the hair light makes. The "gel" I made with the polystyrene frame is attached to the light via magnets.

    In terms of lighting I use a traditional three-point lighting setup with two out-of-production studio lights by Neewer as my key and fill lights. These lights allow me to dial in the brightness fairly well but are limited to 5500K in terms of their color temperature. For the kicker/hair light I use a smaller video light. To position these lights I have a number of arms and clamps I've purchased, which collectively cost more than the three lights did. I justified this at the time because I was tired of tripping over the tripods I originally used (and which came with the lights) and needed the setup to stay put together for day-to-day COVID-19 teaching in the relatively small space that is my office. I have no effective alternative for you to mount lights if you want to avoid tripods, so it may be beneficial to either stick with them or try out bounce cards and a powerful desk lamp if you're strapped for cash. In the pictures in the slideshow above I show how my setup looks from where I'm sitting as well as how I have the kicker light positioned on the arm you can see in the first picture in this section. One thing to note - I took a piece of polystyrene sheet and created a "gel" for that light using a couple of piece of red cellophane, as I liked the way it looked when placed in comparison to the blue wall wash in the background. Obviously, this is just me fooling around but so long as you don't get too crazy you can often experiment just a bit without someone noticing.

    I feel this is a good "default" setup that is suitable for teaching or talking with students online.. If I were going to interview for a literature position I might replace the keyboard with one of the bookend sets you saw in the untreated shot above. I would probably still keep the wall wash light in that case, but place is behind the books. Similarly, if I were going to interview for a digital position I might move my stack of drives or file server to the left of the platform in order to accentuate my comfort with technology (although I'm not sure my current setup would do much in that regard, as it's not that visually impressive).

    Audio Aspects

    As mentioned above, it's my firm belief that a committee or class is more likely to forgive less-than-stellar video if the audio is solid than the other way around. We tend to accept fuzzy, imperfect video (take, for example, the video below, where my camera is actually focused on the microphone rather than my face) if we can hear what the person is saying. The other way around, we're more likely not just to notice it but to comment on it as well. And in an interview situation that is the last thing you want to happen, especially if you need to be answering questions.

    For this reason, my goals here are to go through the various types of microphones, providing audio samples where possible,and what I think is probably the best solution for both interviewing and on-camera recording for a class. From there, I'll talk briefly about the types of equipment you'll need alongside that microphone and what techniques you can easily use to get the best sound quality out of the microphone you eventually purchase or are given by your department. Note, however, that I do not claim to be an audio engineer, and if you have access to one or find a better source you should absolutely listen to them (perhaps, even, in some of the links below). Like with video above, my goal is present multiple options at different levels of complexity so you can make an informed decision about what might work for you rather than present one definitive recommendation.

    Microphone Types

    I suspect that most of you aren't particularly concerned about how a microphone works so much as what microphone works for your purposes. It can still be useful when it comes to purchasing equipment, though, to have a sense of how it works so that you buy the best tool for your particular job. For this reason, I'll be brief and try to give you just the information you might need to make your purchases and provide links to more extensive information elsewhere.

    There are two broad categories of commercial microphone you should be aware of: dynamic and condenser microphones. A dynamic microphone uses a plastic diaphragm (more on what this means below), which vibrates a coil of wire in a magnetic field.That magnetic field, in turn, generates an electrical signal from the vibrating coil which is interpreted as sound. A condenser microphone, on the other hand, uses a thin, electrically-charged piece of metal as the diaphragm, which converts sound waves to the electrical signal when it's engaged with. If you're interested in knowing more deeply about each type of microphone and how they might be used from a technical standpoint I'll include some links to where I got my information from when I describe each concept below. As with video I'll also include futher reading at the bottom of the post.

    Generally speaking, a condenser microphone is more sensitive and able to pick up vocals better in the type of controlled environment you're likely to be speaking in—at least if you follow the advice above. A dynamic microphone is usually not as sensitive, so it might be a better bet if you are worried about a noisy environment. It also tends to be a bit cheaper and does not require additional power requirements (more on this below), so if cost is an issue it might be worth considering. It has a major drawback, however, in that it's going to be obviously visible on the screen. This is a problem with some condenser microphones as well, but not to the same extent.

    One other thing to think about - condenser microphones usually require Phantom Power, which is a (usually) 48 volt DC current used (obviously) to power the microphone. I'll explain more about this when I talk about audio interfaces, as phantom power will come into play there as well, but just know that most quality microphones are not going to work with the standard 3.5mm jack you're used to.

    Examples and Possibilities

    Before getting into the minutiae of various types of condenser microphones, recording patterns, and then finally the sampling of recordings taken with various microphones in my possession I thought it might be useful to record a short video showing three of the possible form factors a microphone might fall into and how those form factors should be taken into account when using live audio versus recording with video versus simply recording audio.

    While the video above gives you a very cursory overview of the kinds of microphones that might be of use it doesn't really speak to the terminology you might want to know when purchasing a microphone. The section below will address some of that, but if you aren't particularly interested in even a brief technical overview and just want to talk about various models and what might work best in what situation you might want to skip the "Microphones with Samples" section below.

    Microphone address, patterns, cables, and capsules

    If you're purchasing a microphone to interview you may just want to go with whatever fits within your budget. If you're purchasing something to record classes, field interviews, or other aspects of the actual profession, however, you may want to take a bit more time and compare models. In doing so, you'll notice them speak of four things fairly consistently: the pattern of the particular microphone, the size and type of "capsule" it uses as well as how you address the microphone when recording, the levels of a microphone going into your computer, recorder, or mixer, and what kinds of cables there are. Each of these subjects are addressed below.

    Microphone patterns

    The human brain is very good at filtering out what it considers to be noise. In fact, one the reasons why the anechoic chamber at Orfield Laboratories is so disconcerting is that it filters out most of the noise for you already, which results in you suddenly hearing things you don't notice in your day to day life, such as your heart beating, your digestion, or your regular breathing. Microphones, on the other hand, pick up everything that happens around them in the range they're designed to pick up. This can be problem when you're recording as it will pick up echos from the sound waves bouncing off of the far wall and coming back towards you.

    While this can be mitigated by breaking up the space and causing the sound to scatter (a similar concept to light diffusion—see above for more information), microphone manufacturers assist the speaker by purposely designing microphones to pick up sound better from a particular direction in three dimensional space. The diagrams below show typical patterns for microphones, where the speaker would be at 0° and the microphone at dead center.

    Omnidirectional Microphone Pattern
    A diagram showing the polar pattern for an omnidirectional microphone
    As the name suggests, an omnidirectional pattern is designed to pick up sound equally well from all directions. What this means practically for our purposes is that your words are likely to echo slightly as they bounce off the far or side walls of the room and return to you. Image courtesy
    Cardioid Microphone Pattern
    A diagram showing the polar pattern for a cardioid microphone
    The cardioid pattern's name betrays its heart-shaped pattern of sensitivity. Rather than sound being picked up equally from any direction it is picked up most strongly from the front, while the space immediately behind the microphone picks up nearly nothing. This makes it less likely to pick up sound bouncing the walls behind it or to the sides. Image courtesy
    Supercardioid Microphone Pattern
    A diagram showing the polar pattern for a supercardioid microphone
    A supercardioid pattern has a more narrow pattern of sensitivity at the front, making it less likely to pick up sounds from the sides. This causes a zone of sensitivity to open up at the rear of the microphone so you have to be careful about echos. This is a typical pattern for a shotgun microphone. Image courtesy
    Hypercardioid Microphone Pattern
    A diagram showing the polar pattern for a hypercardioid microphone
    A hypercardioid pattern narrows the pattern of sensitivity at the front still further, but this increases the sensitivity at the rear. It requires more careful placement to be sure that the speaker is speaking into the microphone rather than to the side and is another typical pattern for a shotgun microphone. Image courtesy
    Lobar or directional Microphone Pattern
    A diagram showing the polar pattern for a lobar or shotgun microphone
    A lobar or directional pattern is created by having a condenser microphone at the bottom of a slotted tube. It can be seen as similar to either a supercardioid or hypercardioid pattern, depending on the type of microphone, but the physical obstruction of the microphone tube blocks out some of the cardioid pattern. Image originally created by "Galank76" for Wikimedia Commons. CC BY-SA 3.0.
    Figure 8 or Bi-directional Microphone Pattern
    A diagram showing the polar pattern for a figure 8 microphone
    A figure eight pattern has equal zones of sensitivity at the front and rear, while sounds from the sides are hardly picked up at all. This makes this microphone excellent for picking up both speakers in a conversation from a single microphone, but means you may have to deal with reflected sound and echoes. Image courtesy has a more in-depth description of the various possible patterns, but generally speaking you're going to want to use an omnidirectional microphone if you're using a lavalier. Conversely, if you're using a shotgun or large-diaphragm condenser for interviewing or recording for class you're going to want to go with a cardioid microphone in most situations. Finally, if you are doing field work or recording interviews between yourself and a subject a figure-8 (in the case of the latter) or omnidirectional (in the case of the former) microphone may be of more use to you. It can be worthwhile, then, to think about the uses you'll put the microphone to rather than the pickup pattern when shopping for a microphone. That said, if the only microphone you have for an interview has a less-than-ideal pattern of sensitivity you can still mitigate any echoing somewhat by placing moving blankets (which, if you're like me, you probably have because you've been dealing with the nomadic academic life) or other absorptive material around the space and to speak in front of something like a bookcase that has sufficent mass and irregularity to diffuse reflected sound and absorb that doesn't get reflected.

    Capsules and Address

    When you see a microphone review or description talk about "capsules," what they're referring to is the part of a microphone that converts the analog sound waves into signals that can be understood by your computer or audio recorder. They consist of a diaphragm that vibrates when it interacts with sound waves. Electrodes pick up these vibrations and send the signal to whatever you are using as a recording device. has an excellent explanation of microphone capsules if you're interested in knowing more, but generally the larger the capsule the richer the sound you're able to capture. You may see microphones referred to as "large-diaphragm" or "large capsule." This is a way of letting you know that the diaphragm of the microphone is over one inch in size and thus you might expect to get that rich sound pickup.

    Another concept to be aware of when looking at microphones is "top" or "front" address versus "side" address, which is the term I used to refer to the large microphone in the video above. What I mean by this is that you're meant to talk into the side of the microphone rather than the top or front of the microphone, as we often see when we look at performers on stage. Generally, a side-address microphone can have a larger capsule than a front address microphone because there's simply more space for the capsule to be contained within. has a good overview with examples that is not too technical.

    Cables and Levels

    If you are using a microphone or webcam with a USB interface, then you don't need to worry about this part as your computer will likely have the drivers necessary to control your equipment. If you're using an audio interface or mixer with a USB output, however, you may be in trouble. While it's likely that your interface connects to your computer via USB, the actual microphone most likely does not. Instead, it uses a cable in one of three common form factors: XLR, 1/4" diameter, and 1/8" diameter. I'll show pictures of each so you know what to look for, but before I do that I want to talk briefly about balanced and unbalanced cables and the notion of levels.

    When looking at microphones (but even more when looking at interfaces and other equipment) you'll see the terms line level, mic level, and instrument level. All these are referring to the level of the signal coming through the particular cable. Line level is the standard level for the interface. It's what the output will be at when it gets to your computer or recorder. Mic level and instrument level, on the other hand, are generally weaker signals that are boosted to line level using a microphone preamp or a direct input box, respectively. While DI boxes tend to be external units you plug into microphone preamps are usually already incorporated into either the microphone or the interface. The main difference is that the signal from a microphone is balanced and the signal from an instrument is unbalanced, so the type of plug may differ and what actually happens to the signal between the microphone and your computer will definitely differ.

    You'll also see the terms balanced and unbalanced used when shopping for microphones, cables, and other audio equipment. All this means is how sensitive they are to noise from electrical appliances, computers, radio, or other equipment. A balanced cable, because it adds a third wire which helps to cancel out any noise that appears on the line, tends to allow a signal to be sent for a longer stretch of cabling without degrading to the point of being unusable. You can read more about this at, but suffice it to say that you're better off with a balanced wire rather than an unbalanced one for the kinds of interview or recording activities we're talking about in this post. (Unbalanced cables, if you're curious, tend to be used with instruments like electric guitars and can be converted to balanced signals when plugged into a direct input box, but that's really beyond the remit here. The link above explains how).

    Types of Cables: XLR vs. Composite vs. TS vs. TRS vs. TRRS

    Now that you have a basic understanding of the terms in play, let's take a look at the types of cable connectors you might run into if you're connecting a microphone to an audio interface or mixing board. There are custom or lesser-used connectors that some audio manufacturers also use (Blue, for example, uses one on its Blue Yeti Pro which I'll outline below), but these basic form factors will get you 75% of the way towards having your microphone connected to your computer in most situations. The other 25% is having an interface or mixer, a USB cable for that mixer, and reading the documentation of your equipment to understand what it can do.

    XLR cable
    A picture of male and female XLR connectors
    Male and female XLR connectors for what is typically known as "microphone cable." They are balanced, with one pin going to the positive, negative, and ground connections. Usually the female end will plug into your microphone and the male end will plug into your interface or mixing board. Image by Michael Piotrowski and originally taken for Wikimedia Commons. CC BY-SA 3.0
    Composite Cables
    A picture of three composite cables
    Composite (sometimes known as RCA, after the company that invented them) connectors for two-channel audio and video. You're likely to have seen these connectors if you have a component audio setup or a non-HDMI TV. There are not many microphones that use composite inputs (as stated below, most microphones tend to record in mono and so don't need the left and right channel cables that come with most RCA setups) but they are included as an option to connect to in some mixers and audio interfaces. Image by Evan-Amos and originally taken for Wikimedia Commons.
    ¼ and ⅛ inch cables
    A picture of a ¼ inch versus a ⅛ inch cable
    ¼" and ⅛" cables are what you are probably most used to thinking about when you think audio cable. They originally were based on the old telephone patch cables you sometimes see in movies and on television (see, for example, Peggy's introduction to the "nerve center of the office," the switchboard, in the first episode of Mad Men). The ¼ in a ¼" cable refers to the cable connector's diameter, while the ⅛" connector is actually 3.5mm (and is more commonly referred to as such nowadays)—the ⅛" there is just an approximation. ¼" and ⅛" cables can be balanced or unbalanced, and the ¼" unbalanced versions are often referred to as "instrument cables." The smaller jack to the left of the imate is a 2.5mm cable used sometimes by telephones and there are both stereo and mono versions of the 3.5mm cable shown. More on this in the next picture. Anonymous image originally taken for Wikimedia Commons
    TS, TRS, and TRRS cables
    A diagram showing TS, TRS, and TRRS jacks
    ¼" and ⅛" inch jacks are usually wired with two, three, or four wires. The way you tell the difference is by the number of "rings" (from which the R in the name comes); one ring indicates a mono cable with only two wires: one for signal (tip or T) and one for ground (sleeve or S). The ring is the metal between each of the dark bands. The most common, TRS jacks are generally called stereo cables and consist of two signals - tip and ring, each of which carry either the left or right stereo signal - along with the sleeve. TRRS cables add a third signal, which carries microphone or video input. These are usually found only in headset microphones, camcorders, or as a way to use an external microphone on some computers and cell phones. As such, they tend to be more common in the ⅛" form factor. They can be wired in different ways, which the next picture will describe. This image originally taken for the Cable Chick website, and more information can be found there.
    TRRS wiring differences
    A diagram showing different wirings of TRRS jacks
    Unfortunately, there is no one set standard to TRRS cables, and so the portion of the cable used for microphone or video versus left and right audio signal can differ. If you use equipment with a TRRS jack you'll need to check to see how they're wired before buying any third party equipment for them. This diagram shows three possible standards - the standard for camcorders, the Apple/CTIA standard (which is the one you're most likely to encounter) and the OMTP/Nokia standard. This image originally taken for the Cable Chick website, and more information can be found there.

    Microphones with samples

    Some notes on these microphones: as mentioned above this list is meant to be a representative (but by no means comprehensive) sample of the sorts of equipment you might find easily or that your university might provide you with, based on my acquisitions since I started getting interested in doing videos for classes and saw the writing on the wall in regards to Skype interviews. I've included a link to purchase most of these microphones from non-Amazon companies (in particular B&H, because I've been happy with their service and enjoy their online commercials). They are not affiliate links, and I make no money off of any of my posts or recommendations. You may also be able to find cheaper prices if you Google for the name of the item or use a service like to become part of a group purchase from the manufacturer. While I don't anticipate needing to buy any more microphones, if I gain access to others I'll add them to the appropriate category so that this can become more comprehensive.

    The examples provided below are all condenser microphones. Where I think it might be confusing I've mentioned whether the microphone is front-address or side-address and the microphone's form factor. Additionally, most of these microphones record in mono rather than stereo. Where they do record in stereo, I've noted it. Beyond that, I'm not going to delve too deeply in the specifications, but I'll include links to both the manufactuer's specifications and, where available, the specifications from the B&H website if you are interested in those aspects.

    One last thing to consider when selecting a microphone is whether or not you'll be able to tweak the audio before people hear it. Where possible, I've included a sample of the unprocessed recording from the microphone alongside the same recording run through the REAPER audio suite's Reafir dynamics processor (more on this, briefly, below in the postprocessing section). My thought here is that you might want to get a sense of how various lower-cost options would work for recording if you aren't going to immediately be using the microphone to interview or stream since a noisy microphone can be cleaned up in postproduction. There are also ways to do this postprocessing cleanup on live audio, which I'll include in the postprocessing section as well, but they are a bit finicky or require an additional hardware purchase.

    Side-address microphones
    CAD Equitek E100S Supercardioid Condenser Microphone- $499
    A promotional image of the CAD_e100s

    As mentioned in the video above, this is probably the nicest microphone that I own, and is certainly the only large diaphragm one. It comes highly recommended for voice work and spoken word, and has a very low self-noise floor—meaning that it is less likely to pick up the general hiss that other microphones show when you first turn them on. It is also flattering to male voices, but suffers a bit when it comes to singing and the female voice for the same reason. This is part of the reason why it's a good idea to test out microphones before purchasing to find the one that works best for you if you can. Another thing to consider is that this microphone is supercardioid, so it does have a small field of sensitivity at the rear of the unit.

    If the price makes you leery, you might be interested to know that it tends to show up periodically on and other sales/group purchase sites, so you can get it for less than the $499 list price if you're willing to watch and wait. That is how I picked up the microphone I have.

    One final note—as the video shows this microphone is best when in close proximity to your mouth (see the section on proximity effect below) and as such is better suited for recording over slides for a class than for interviews or on-camera video. I would not hestitate to recommend it if you're going to be talking over slides, but think twice if you're going to be on camera as you may find yourself needing to buy another microphone as well.

    Manufacturer's Specifications (opens in another window)

    B&H Specifications (opens in another window)

    Unprocessed audio
    Processed audio
    Blue Microphones Yeti Pro- $249.99
    A promotional image of the Blue Yeti Pro

    Blue microphones have a good reputation as a budget microphone for podcasting, general recording, and streaming, although the microphone chosen for those activities is often the Snowball rather than the Yeti or Yeti Pro. The difference between the latter two microphones is primarily that the Yeti Pro provides you with an XLR connector, which gives you the ability to use it both with an audio interface and plugged directly into your computer. It has threecapsules, so the sound is recorded in stereo (one channel for each capsule) as well as a feature that allows you to change the pattern of the microphone between four options: cardioid, stereo, omnidirectional, and bidirectional. This makes it a good option for recording ambient room noise, stereo effects, and conversations as well as what you're likely to be interested in it for if you're reading this post—single-speaker address without a lot of background noise. Additionally, it comes with a 3.5mm headphone jack, which means you can use it as a headphone amplifier as well as a microphone. This allows you to listen to yourself while you record and correct pitch and volume issues on the fly.

    An image of the RCA 77 with flag

    One other thing it's important to remember: the Yeti Pro is meant to be a side, rather than front-address microphone.I have seen and heard of numerous people who use the Yeti Pro incorrectly, effectively speaking into the top. I blame this on cultural memory and false visual cues—the Yeti Pro obviously takes some its design cues from the RCA 77, which is often pictured at an angle. Combine that with the front-address most dynamic microphones use and a first-time user is likely to make assumptions about whythat angle exists that are simply wrong. It might help to remember that the RCA-77 was side-address as well by picturing either it or the Yeti Pro with a call letters flag placed over the top, which would naturally make a speaker address it from the side.

    Manufacturer Specifications (opens in another window)

    B&H Specifications (opens in another window)

    XLR connection
    Unprocessed audio
    Processed audio
    USB connection
    Unprocessed audio
    Processed audio
    Front-address microphones
    Zoom H6 and XYH-6 Mic Capsule- $349.99
    A promotional image of the Zoom H6

    Since it is primarily an audio recorder and interface, the description of the H6 in the audio interfaces and mixers section below will speak to the capabilities of the unit more broadly. It is included in the image here because you require either an H5 or H6 in order to use the various microphone capsules Zoom offers. Here, I want to talk about the XYH-6 capsule that comes with all of the versions of the product. Some also include a mid/side microphone, the MSH-6, but I'll include more information regarding that capsule in the next slide

    An X/Y microphone is less a particular type of microphone (although that is how it is presented by the H6) and more a stereo mic'ing technique, wherein you place two microphones right next to each other such that the diaphragms are almost, but not quite, touching. It's designed to pick up a stereo image, and as such it is intended for situations where you're six feet or more from the subject. That's how long it takes for a stereo image to develop. That said, it is noted elsewhere that the x/y configuration on the Zoom H6 can be an effective for close-up work. For this reason, I'll provide close-up recordings (no more than a foot away from my mouth) as well as recordings from about six feet away.

    One aspect of the Zoom H6's X/Y capsule that might be of interest is the ability to shift between a 90° and 120° angle between the microphones. Switching the angle can create a wider stereo image, but obviously that wider image requires additional distance. Also, because you're speaking at a distance the X/Y capsule suffers some of the problems with proximity effect and audio dropoff that you see with any microphone at a distance. That said, it can be a good microphone to get crowd noise or perhaps to pick up class discussion without requiring each student to be individually mic'd.

    Manufacturer's Specifications (opens in another window)

    B&H Specifications (opens in another window)

    90° setting
    Unprocessed audio
    Processed audio
    120° setting
    Unprocessed audio
    Processed audio
    MSH-6 Capsule for the Zoom H6- $79.99
    A promotional image for the Zoom MSH-6

    An X/Y microphone is less a particular type of microphone (although that is how it is presented by the H6) and more a stereo mic'ing technique, wherein you place two microphones right next to each other such that the diaphragms are almost, but not quite, touching. It's designed to pick up a stereo image, and as such it is intended for situations where you're six feet or more from the subject. That's how long it takes for a stereo image to develop. That said, it is noted elsewhere that the x/y configuration on the Zoom H6 can be an effective for close-up work. For this reason, I'll provide close-up recordings (no more than a foot away from my mouth) as well as recordings from about six feet away.

    One aspect of the Zoom H6's X/Y capsule that might be of interest is the ability to shift between a 90° and 120° angle between the microphones. Switching the angle can create a wider stereo image, but obviously that wider image requires additional distance. Also, because you're speaking at a distance the X/Y capsule suffers some of the problems with proximity effect and audio dropoff that you see with any microphone at a distance. That said, it can be a good microphone to get crowd noise or perhaps to pick up class discussion without requiring each student to be individually mic'd.

    Manufacturer's Specifications (opens in another window)

    B&H Specifications (opens in another window)

    Unprocessed audio
    Processed audio
    Shotgun microphones

    Shotgun microphones are more properly called "interference tube" microphones, and consist of condenser microphone at the bottom of a slotted tube. The idea is that sound recorded straight-on will pass unimpeded down the tube, but sound recorded from the sides will be partially cancelled out as it enters the sides of the tube at different points and bounces against the walls and each other. More information regarding how they work is available here.

    Audio-Technica AT875R Short Shotgun Microphone- $169
    A promotional image of the ST875r

    The Audio Technica AT875R (not ATR875R, which you will hear me refer to it as in the recordings below) is a shotgun microphone. While usually shotgun microphones have a lobar pattern this microphone claims to have a "line+gradient" pattern that tends to be more like a supercardioid than anything else—which is why you hear me refer to it as such in the audio. It's intended to be able to pick up voices in noisy environments and can have some pretty severe proximity effect and dropoff issues if it's not positioned right, but is not as finicky as a true shotgun microphone with a lobar pattern. I have heard it argued that you should properly point the front of the microphone at your sternum, rather than your mouth, for the greatest effect and so I recorded audio with it pointed in both locations.

    As I said in the video above I'm not a big fan of this microphone, personally. Because of the way you have to position the microphone just out of frame it makes your voice seem more distant than a lavalier microphone might (compare it, for example, to the audio of the webcame below) and the ease of not having to thread a wire through my clothing doesn't overcome that sense of distance. Similarly, if you were to move around a room you'd have to have someone actively pointing the microphone at you in order to get the best sound, which may not be possible if you're recording a lecture.

    Manufacturer's Specifications (opens in another window)

    B&H Specifications (opens in another window)

    Unprocessed audio
    Processed audio
    Unprocessed audio
    Processed audio
    Lavalier microphones
    Movo Photo LV8-D Omnidirectional Lavalier Microphone- $100 (it can be found on the manufacturer's site for $69.95, however)
    A promotional image of the LV8-D

    This is the nicest lavalier microphone I own. It uses a XLR hookup rather than a 3.5mm jack, which means it's designed to be plugged into a recorder or mixer. It also comes with a 12mm capsule that's significantly larger than the capsules of other lavalier microphones. This allows it to pick up sounds that may not be picked up by other units.

    I also really like the lack of noise floor (or microphone hiss) that this microphone has. I attribute that to the larger capsule, but I could be wrong.

    One positive and negative of the microphone is that it comes with a 6½' cable. It's useful because it's long enough to snake through your clothing if you're tall, but it's not long enough that you can really move away from your recorder or mixer if you need to. This can be overcome with a wireless pack, but that significantly increases the cost of your setup. Another issue is that while the capsule is larger and thus can pick up sounds quite nicely it can make it harder to find a good foam windscreen and microphone clip.

    Manufacturer's Specifications (opens in another window)

    B&H Specifications (opens in another window)

    Unprocessed audio
    Processed audio
    Audio-Technica ATR3350- $35
    A promotional image of the ATR3350is

    This is an extremely versatile and inexpensive lavalier microphone. As you can see it comes with the microphone and windscreen, a lapel clip, and a splitter that allows you to have the microphone as well as a set of headphones come out of something like your cell phone or an older laptop computer with a TRRS jack. It's powered off an LR44 battery, which is the same sort of battery that powers small calculators, pacemakers wristwatches, and the like. If you want to try to record directly to your computer or to a recorder with a 3.5mm input this will serve you well with fairly low out of pocket costs.

    Like the Movo the pickup pattern of the microphone is omnidirectional, so it will pick up sounds from any direction. However, it's smaller than the 12mm capsule of the Movo so it's not going to pick up low sounds quite so easily.

    Again like the Movo the one downside of this microphone is that there's a 20' cable running from the capsule to the recording unit. The battery compartment is along this cable, which can be annoying as well, and there's no LED indicating that the power supply is on or off so you can accidentally leave it on and not realize it if you're not careful. When I was using this microphone to help a hard of hearing student be able to hear me in class I tended to carry a packet of batteries just in case I left the unit on when I put it back in my desk after class.

    Manufacturer's Specifications (opens in another window)

    B&H Specifications (opens in another window)

    Unprocessed audio
    Processed audio
    Yoga EM-8
    A promotional image of the EM-8

    Unlike the other two lavalier microphones I mentioned here the Yoga EM-8 is a stereo microphone. It has two cardioid receivers set in opposition to each other, so the overall effect is bi-directional. The noise floor is not great so it hisses a lot.

    There are two things about this microphone that are interesting, as well. You can switch the microphone between stereo and mono outputs, so if you find the stereo aspects of this microphone are not to your taste you can try it as a mono microphone. The other thing that's interesting is that there's a 3.5mm jack between the two capsules and the power pack, and then from the power pack to the computer or recorder. It's also possible to use this microphone with a ¼" jack with the provided adapter. The whole thing is powered off a single AA battery.

    You'll note that the image for this entry is not labeled Yoga, but "Skytonic." That is because this is an extremely low-end microphone that is made in Taiwan for the rebranding market rather than as a product on its own. The company that produces it, Yoga, still makes the EM-8 but it no longer seems to be available via retail outlets anymore. I purchased mine from Maplin in the United Kingdom on a whim when I realized my point-and-shoot document camera had the ability to record audio from a 3.5mm jack, and as such I don't have a record of how much I paid to use instead of a list price, unfortunately. One of the reasons I ended up buying the ATR3350is is because the Yoga EM-8 is not really worth the cost. It is interesting as a stereo lavalier microphone, though, so worth knowing about as an example of a general type.

    Manufacturer's Specifications (opens in another window)

    Unprocessed audio
    Processed audio

    Microphone Placement

    It's not simply enough to have a good microphone. That microphone also needs to be placed in the best position possible to get the full sound of your voice. If all you're looking to do is record audio where you won't be seen that can be easier than if you're looking to both record audio and video, but in either case the most important thing is to make sure the microphone flatters your voice and makes you sound as you expect to. While certainly not perfect, the video below helps to illustrate what a difference proper microphone placement can make in terms of the quality of your voice even with a microphone not intended to be used for it. I've done nothing to improve the quality of the audio either in postproduction or by treating the room for recording. What you're getting here is the raw sound and video from each of the two webcams.

    Proximity Effect

    The reason my voice sounds fuller when a microphone is closer to my mouth is known as the proximity effect. Basically, when you're using a microphone with a non-omnidirectional pattern the difference in pressure between the front and back of the diaphragm is what helps to pick up the sound. Since higher frequency sounds tend to exert more pressure, microphones are built to compensate for that. That means that when the microphone is moved closer the lower end will be picked up more while the higher end drops off.

    Effectively, what this means for your interview or recording is that men can have deeper, richer voices—and the gravitas we convey societally to those voices (think the "in a world..." of the stereotypical movie trailer)—simply by speaking closer to the microphone. This can be a double-edged sword, however, as speaking too close to the microphone can cause a man's voice to be overly-bassy and plosives can become overemphasized.

    If you want added bass tones when recording over slides and the like the proximity effect can work to your benefit. Likewise, If you find that speaking into a microphone makes your voice deeper than you'd like or too unlike your natural speaking voice you may want to consider an omnidirectional microphone, moving the microphone further away from you, or finding a microphone designed to cut down on the proximity effect. If you go with the former two options you may need to position yourself to minimize reflected sound from the room. Obviously, however, regardless of your individual situation placing a microphone close enough to your mouth to really benefit from the proximity effect is going to look odd on video, and so you'll likely have to forego sounding like James Earl Jones when you wow your hiring committee.

    Lavalier Microphone Placement

    You will often see a lavalier microphone placed near the top of an article of clothing, especially along lapels in suits. After all, they are colloquially called "lapel" microphones, right? This may lead you to think that placement along the collarline is key. Pay close attention to how the microphone is actually placed on the speaker, though. Generally, what's being done is that the microphone is being placed as close to possible to a position about six inches from the mouth, which places the microphone about two inches above the line drawn by your nipples. Depending on how you're positioning the microphone it may not prove to be possible to center it perfectly, so really anywhere in a space between an imaginary line between your shoulders and one between your nipples that is close to that sternum spot is best.

    One thing that's going to determine how you place the microphone is the type of clothes you wear and what, exactly, you can do to place the microphone on your person. Generally, along the button line of a button-down shirt works best if you're wearing one, or along the v-line of a collar towards the bottom. For women, they might even consider somewhere along their braline if all else fails. If you do place it along a bra, a coat lapel, or on a tie, however, you have to be careful to place it in such a way that fabric layers rubbing against each other doesn't get picked up more than your voice. Usually, a lavalier microphone will come with a clip to place it. This can be supplemented or replaced entirely through the use of moleskin, transpore, or gaffer's tape, especially if it needs to be placed very specficially or you don't have a clip handy. Another option are purpose-made adhesive disks or a vampire clip, which is a small clip attached to two pins that you press into a collar or along a lapel where multiple layers of fabric might hide the pins. Unless you're set on hiding your microphone, however, tape or the provided clip will generally work best. You might also experiment with the angle the microphone is placed at. I've seen both facing upwards and downwards recommended, but I think it's going to depend on your particular microphone more than some set standard I can suggest to you as a tip.

    Finally, in some cases people want to avoid their microphone being visible to the audience. One way to do this is to buy a small microphone not likely to be picked up on the camera. In fact if you do this it's likely you can get away with a headset rather than having to pin the microphone to your clothes. It's much more expensive, however, and not necessary usually when interviewing or when teaching. If you still want to make the attempt, however, you might consider placing the microphone in a beard or along the hairline, instead. Often theatrical microphone placement techniques will come into play, but I'm not really able to speak to those with any level of authority.

    Sound Treatment

    No matter what microphone you have, an empty room with a lot of broad, flat surfaces is going to reflect your voice and sound echoey. Generally speaking (and certainly in a lot of the links down at the bottom of this post) the solution for this is to create a dedicated recording space where the combination of room shape and acoustic treament can either absorb or diffuse these errant sounds and make sure that they aren't picked up by your microphone. It's incredibly unlikely you're willing to create permanent acoustic treatment unless you're a serious audiophile or plan to be doing a lot of interviewing or recording in a dedicated space. And even if that's your plan serious acoustic treatment may not be within your budget. There are some tricks you can use to help mitigate any sound issues.

    Before you do anything try recording something in the space you're going to be working in. If it sounds all right to you, then you're lucky and won't need to do any extra work. If there are some odd elements you'd like to remove then what you want to do is break up those broad reflective surfaces. Generally speaking a proper room treatment will include bass traps at the corners, acoustic panels to absorb sound on the walls, and possibly acoustic diffusers. In the absense of any of those items what you might do is record or stream in front of a bookcase in order to absorb any sound from speakers (if you aren't using headphones or earbuds), bring heavy blankets, thick moving blankets, or dedicated acoustic blankets that you can put in corners or around your camera and lights to help dampen your voice before it reaches those outer walls, and seek out locations that don't have tall ceilings or hardwood floors for the sound to bounce off of.

    My office space, for example, has eight foot ceilings and carpet on the floor. I sit with a bookcase to my rear, which helps to diffuse any sound from speakers, and while the wall with the coffee cart is fairly flat the lights and camera help to break the space up. If I were being really serious about recording rather than interviewing I might make a frame out of PVC pipe and put some moving or acoustic blankets behind the lights and camera, but when I'm recording I'm typically using a fairly directional microphone anyway, so things sound ok. If you're reading this more for recording or a semi-permanent streaming space you may want to experiment a bit. An acoustic panel can look like a piece of decoration if built properly, but most people in the kind of price range I expect we're talking about go for pre-made acoustic panels which are hard to pretend are anything but what they appear to be. I wouldn't recommend them for a background if you're interviewing or lecturing online.

    Audio Interfaces and Mixers

    While in theory you could use an adapter to attach a microphone to your computer directly, the fact that most microphones output at something less than line level or simply won't output at all without phantom power means that you're really going to need something to connect between your computer and mic. And even if you aren't using a microphone that requires phantom power the preamps that come with something like the Blue Yeti Pro may turn out to be less than ideal for your purposes. Therefore if you're going to be recording for class it might be worthwhile to consider an inexpensive audio interface, dedicated recording unit, or a mixing board with the ability to output to your computer via USB.

    Here, much like with the selection of microphone or camera I'd think about the purposes and environment you're likely to be in before purchasing any item. If all you're going to need is a way to connect a good microphone to your computer then a dedicated audio interface like the Focusrite Scarlett series might be enough for your purposes. If you want more ability to tweak the settings for individual microphones or you think you might be doing live interviews with guests for an online class then you might want to consider a mixing board that has a USB output. And if your setup needs to be portable, then you might consider a recorder with audio interface functions then something like the Zoom H6 might serve your purposes.

    As you've no doubt noticed by now I am only really giving you opinions on specfic units I've owned, and so here I can't do the slide by slide comparison like I have for microphones. I'll mention what I like about the Zoom H6 below, but the USB-output mixer I own was a Goodwill purchase I repaired and cleaned up, so I don't know that a direct comparison would be fair. I'll provide a recording from it below as well so you can compare, but know that it wasn't purchased new in the first place.

    Zoom H6

    The Zoom H6 is a recorder and audio interface with four XLR/¼" "Combi" inputs (note, however, that each of the tracks are mono, so if you have a stereo microphone you'll need to use two of those inputs) as well as a 3.5mm input that can handle both stereo and mono microphones. It has the ability to add different "capsules" to the top of the unit, which allow you to adjust for different recording conditions, so it could be a decent all-around recorder if you need something that can operate in different conditions. I only have two of the capsules—the X/Y and mid/side ones—which I've written more about above.

    While I like this recorder quite a bit, the "H6" in its name is a bit of misomer. It really has four inputs plus the capsule at the top. Most of those capsules can record in stereo and, in the case of the X/Y capsule, have an added 3.5mm input. Zoom does provide a capsule that gives you an additional two inputs but they cannot provide phantom power and so are useless for condenser microphones. If you don't think you'd need even four inputs and aren't interested in the capsules Zoom also offers some smaller recorders that might serve your needs, as well.

    So what should I get?

    I'd argue the most important considerations when thinking about what sort of interface you need—at least for the purposes I expect most of you are going to put them to—is the quality of the microphone preamps and the amount of inputs available. [ADD TO THIS—TALK ABOUT PREAMPS. MENTION THAT WHAT AUDIOPHILE AND AV SITES THINK IS GOOD OR BAD MAY NOT BE THE SAME AS WHAT YOU NEED].

    In terms of inputs, the simple truth is the more input channels available to you the more expensive the unit is going to be. So if you're sure you're going to only use it with one microphone you can get something that's much less expensive than if you want to have the option of recording multiple sources.

    Speakers and Headphones

    Once you have the microphone set up and placed properly, you'll want to address the other part of the equation—speakers or headphones. Generally, you want to avoid using speakers. This can be less obvious if you primarily record, but once you introduce a microphone into the room there's a possibility it will pick up anything that is said by others and played through your speakers despite some software's attempts at audio suppression. If you are using a cardioid microphone this can be mitigated through proper microphone placement, but an omnidirectional microphone is likely to cause a nasty echoing effect with whoever you're interacting with as it picks up whatever they've just said and plays it back to them.

    TOZO T10 earbuds
    A set of inexpensive wireless earbuds, like these TOZO T10's, can be an inobtrusive way to hear a committee while not dealing with feedback effects from your microphone.
    DT770 Studio headphones
    A decent set of over-the-ear headphones are useful for editing recorded audio, as audio that sounds good in decent headphones will sound good in earbuds or over speakers, as well.

    If you're following my advice above you're going to be using a lavalier microphone if you're on camera, since they tend to be visually inobtrusive. They're usually omnidirectional, so you're going to have to deal with the possibility of unintentionally picking up noise. For this reason, you should consider an inexpensive set of bluetooth earbuds and running the sound through them if you can. Until recently I didn't have a pair as I generally prefer over-ear headphones for listening to music or speech, so I purchased this set (which charges via micro-USB or the Qi protocol) for $40 via the manufacturer's website. The goal here isn't to break the bank, but just to make sure you can hear the committee rather than getting the absolute best sound possible. If you already have a pair of wired earbuds you can also try snaking them down through your clothes and out to your computer, but I doubt you'll have enough cable to do this without it being noticed unless you buy an extension cable. Adding that cable, however, introduces another point of failure in your setup that you need to be aware of.

    If you're recording rather than interviewing or interacting live with an audience then you have the luxury of getting your audio closer to perfect than you might otherwise. To help you do that I would invest in a good set of headphones to do your sound postprocessing if you can. You'll be able to pick up issues wearing headphones that you might not notice using your computer speakers and correct them. This will improve the overall quality of your audio in postprocessing and make you sound like the professional you are.

    Postprocessing (recorded video only for instructors)

    1. Software options
      1. Audio
        1. Audacity
        2. Reaper
        3. Apple's education bundle. Much more than Reaper, but you get Final Cut Pro which might be worthwhile if you're doing videos for a class.
      2. Video
        1. Divinci Resolve
        2. Final Cut Pro
        3. Don't have access to Premiere - blow the money on the subscription for a month? What would it be?
        4. LUTs? Or do we mention that with OBS and then again here?


    Good and Bad Examples

    Visual Aspects

    The Rule of Three
    Lighting Darker Skin

    Audio Aspects

    Sound Treatment

    Add new comment

    Restricted HTML

    • Allowed HTML tags: <a href hreflang> <em> <strong> <cite> <blockquote cite> <code> <ul type> <ol start type> <li> <dl> <dt> <dd> <h2 id> <h3 id> <h4 id> <h5 id> <h6 id>
    • Lines and paragraphs break automatically.
    • Web page addresses and email addresses turn into links automatically.
    Article Type